Avenview DVI-VIDEOWALL-9X - Manual (Page 4)

www.avenview.com|4
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
1.4 Introduction
The DVI-VIDEOWALL-9X is a 9 port DVI/HDMI Compliant Dual-Image Video Wall Processor. This powerful
device has real time data/video processor for multiple flat panel displays or projectors. With the most flexibility on
the input side, the unit accepts DVI/HDMI, VGA CVBS, S-Video, and YPbPr and splits the input onto the
connected 9 displays.
The DVI-VIDEOWALL-9X can display up to 2 video inputs (Digital and Analog) from the front end video mixer
with the supplied Y cable. Thru DVI transmission, the quality of the outcome videos is guaranteed. The output
display is grained up to 255 by 255 squares. Virtually any setups for the display layout can be possible by the
provided software.
The embedded mixer is an advanced video processor for multimedia presentations. It supports up to four
popular types of video inputs, of which two can be outputted simultaneously in Picture-In-Picture (PIP) or
Picture-Aside-Picture (PAP) modes.
The DVI-VIDEOWALL-9X allows you to manipulate input videos, wherever position and whatever sizes you
want for viewing. The embedded scalar converts signals from input sources to match the native resolution of
monitors, flat panel displays, projectors as well as user-selectable output settings up to WUXGA (1920x1200).
The DVI-VIDEOWALL-9X sends the resulting mixed video thru DVI interface to the connected
monitors/projectors based on the display layout. The layout can be readily modified to fit your applications and
optimize visual effects. Typical applications include digital signage, and broadcasting/education/ surveillance
systems etc.
- Nine DVI outputs from 640x480 to 1920x1200 with a local loop out for monitoring
- Supports HDMI, DVI, S-Video, CVBS, Component, and VGA input, from 640x480 to 1920x1200,
interlaced or progressive
- Advanced video de-interlace for improving 480i and 576i SD video input
-
PIP, PAB, Full screen modes and adjustable size& position through software
- Resize, position, flip, zoom output video
- Perfectly as a video screen splitter, a video converter and a video switcher
-
Each DVI output has an independent controllable display area
- User-selectable output settings, up to 1920x1200
-
Can be cascaded to obtain more displays
- Image parameters and layouts are automatically saved in flash memory of the device and can be
recalled for later use
- Several Image parameters and layouts can be saved in computers and can be loaded for later use
- Software control through RS-232/RS-485
- Firmware upgradable for support of new features and technology enhancements
- Built-in factory reset switch
- 2U size