Ferguson D 660/D 660 K - Manual (Page 13)

12 BASIC OPERATION
BASIC OPERATION
DVD TITLE & MENU PLAYBACK
1. Press TITLE button to access the title menu of
the disc.
2. Select the item with the CURSOR buttons then
press OK to start playback.
3. Or press the NUMBER buttons to play the cor-
responding chapter directly.
4. Press MENU button and the main menu of the
disc will be displayed on the TV screen. Menu
screen varies with the disc.
Notes:
This operation is only available for DVD discs. Some
discs may directly begin playback after data reading.
1. Press MENU button to switch the PBC mode to
ON. For VCD2.0 and SVCD discs, PBC menu
will be accessed automatically.
2. Press the NUMBER buttons to play the corres-
ponding chapter directly.
3. During playback, press STOP button to stop
playback.
VCD MENU PLAYBACK
1. For VCD2.0 and VCD discs, switch PBC to OFF
and access the sequential playback mode.
2. Under sequential playback mode, you can press
the NUMBER buttons to play the corresponding
chapter directly.
SEQUENTIAL PLAYBACK
Note:
NUMBER buttons are available during playback.
For VCD 1.0 and 1.1 discs, sequential playback
mode will be accessed directly after disc reading.
(only available for sequential playback mode)
PLAY/PAUSE
1. During playback, press the PLAY/PAUSE button on the
remote control or the button on the front panel to
pause playback.
2. When playback paused, press the PLAY/PAUSE button
or button again to resume playback from the pause
point.
1. Press NEXT button on remote control or button on
front panel to skip forward to the next chapter.
2. Press PREVIOUS button on remote control or button
on front panel to skip back to the previous chapter.
CHAPTER SKIP
NUMBER
PREVIOUS
NEXT
OK
PLAY/
PAUSE
MENU
TITLE
STOP
OK
PLAY/PAUSE SETUP STOP
V O L U M
E
ZOOM BROWSE REPEAT
SEARCH
PREV NEXT
STEP.
MENU TITLE OSD
ANGLE AUDIO SUBTITLE
CHANNEL 3D
F.R. F.F.
SOUND
STEP PLAYBACK
Each pressing the button advance the disc a frame
ahead. Press the PLAY button to resume normal
playback.
STEP