Ferguson D 660/D 660 K User Manual

Page 3

Advertising
background image

2

PRECAUTIONS

SAFETY PRECAUSTIONS

To prevent fire or shock hazard, do not expose

this appliance to rain or moisture.

This appliance is a Class I laser product. Direct

exposure to beam may cause eyes injury.

Do not open the cabinet by yourself and leave

all servicing to qualified service personnel.

Power requirement for this appliance is AC

110~240V, 50/60 Hz, please ensure the power

supply is in the range before turning on.

OPERATION PRECAUSTIONS

Please use the original packing case and

materials when transporting this DVD player,

and pack the appliance in the original factory

packing style for better protection.

The temperature of the upper cover board

and the rear panel of the player may be high

after a long period of time of playing. This is

not a problem but a normal phenomenon.

When the player is not to be used, please

remove the disc and turn the power off.

Malfunction may be caused when the player

is not used for too long, so please turn it on

occasionally for better maintenance.

Some kinds of discs may cause the

appliance to hang, please restart the

appliance when this occurs.

Interval of restarting should be longer than 10

seconds, which can help to extend the life

expectancy of the appliance.

The moving pictures and played sound may

be affected when the DVD player is placed

close to TV set, radio or VCR, so please keep

them further away.

This DVD player is a device of high

technology and high precision. The image

quality may be impaired when the laser

head or the disc driving parts are dirty or

damaged.

Condensation may cause certain kinds of

damage to the player. It may form because

The player is moved from cold to warm
surroundings;
The player is placed inside a room where
the heater is just on or exposed to the
ventilation hole of an air-conditioner;
The player is moved out from an air-
conditioned room to a place of high
temperature and humidity in summer time.
The player is being used in a surrounding
of high humidity.

Use a soft and dry cloth for cleaning.

For the stains that cannot be removed easily,

apply some diluted neutral detergent to a

cloth, wring the cloth dry and wipe the stains

away, then use a dry cloth to clean. Do not

use any solvents such as thinner or benzine;

otherwise the surface of the player may be

damaged.

When use duster cloth with chemical sub-

stance for leaning, please refer to the using

procedures the product requires.

Manufactured under license from Dolby
Laboratories.

Dolby

Pro Logic

and double-D

symbols are trademarks of Dolby Laboratories.
Confidential unpublished works. All rights
reserved.

This appliance had better be unplugged

after using each time for better protection.

LOCATION

ACQUIRING CLEAR PICTURES

CONDENSATION PRECAUTIONS

Do not use the player where condensation

may be form easily, otherwise damage may

be caused to the disc and inner parts of the

player. Please take the disc out, plug the

power cord into a wall outlet and turn the

player on. The moisture will disappear when

the temperature rises two or three hours later.

CLEANING PRECAUTIONS

Advertising