Ferguson Ariva 100 cable User Manual
Page 10
6. Rear panel
LOOP OUT:
Output of the signal from the converter to another satellite receiver.
CABLE IN:
Input of the concentric cable
HDMI:
Digital image and sound output.
LAN:
The Ethernet port used for communication over the LAN
network/Internet.
AUDIO (L/R):
Analogue stereo audio output, 2 x RCA.
COAXIAL:
Digital coaxial audio output.
COMPONENT (YpbPr):
Component video output 3 x RCA (YpbPr).
OPTICAL:
Digital optical audio output.
TV:
SCART output, for connection to a television.
RS232:
RS232 port for communication with a PC computer.
ON/OFF:
Power on/off switch.
7. Connecting the cable receiver
The following illustrations show cable connections for a television and other devices connected
with the receiver. If you require any assistance in connecting individual devices, contact your
local technician. Before connecting or altering cabling, disconnect the receiver from the
mains !!!
7.1 Connection by means of an HDMI cable (recommended)
1. Connect the antenna to the Cable IN socket of the receiver.
2. Connect the HDMI to the receiver out and the television in.
Connection by means of an HDMI cable allows you to obtain the highest image quality.
10