Ferguson Ariva 100 cable - Manual (Page 11)

If you have an amplifier with an HDMI out and in, which supports sound sent over HDMI,
connect the devices by two HDMI cables. As in the following figure: one cable to theamplifier,
and the other from the amplifier to the television set.
7.2 Connection by means of the YPrPb (component) sockets
1. Connect the antenna to the Cable IN socket of the receiver.
2.Connect the video and audio by means of five cinch cables to the television set.
Three cables, coloured green, blue and red, are used to send the three colour
components. The two remaining cable, red and white, are used to connect sound (right
and left channel).
7.3 Connection by means of SCART cables
1. Connect the antenna to the Cable IN socket of the receiver.
2.Connect the television to the port in accordance with the description. We recommend
using shielded SCART cables.
11