Haltech Platinum PRO PLUG-IN Nissan Z32 300ZX (HT055007) - Manual (Page 13)

ECU Installation
To install your new Platinum Pro Plug-in to your Nissan Z32 / 300ZX,
please follow the procedures below.
You will require the following tools
• Screwdrivers Phillips No 2 , Small Flat
• Socket set with 10mm socket
• Cable Ties / 3M Velcro tape or similar
1. Locate your factory ECU. This will be located in the foot well of the passenger side
of the vehicle. To access, pull back the carpet and unscrew the four 10mm bolts
securing the cover in place. Remove the cover to access the ECU.
Figure 1 – Left hand footwell showing ECU cover
Figure 2 – Factory ECU Mounting Location with cover removed
ECU Pinout
Figure 11 – Platinum Pro Plugin Z32 / 300ZX ECU Pinout