HID EDGE Solo v110 User Guide - Manual (Page 33)

. . . . .
S e t t i n g U p C a r d s
Edge Solo User’s Guide 29
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A d d i n g C a r d s
When you add a card, you can assign the card to a person, or you can assign it later.
You can add cards to the system the following ways:
• Add cards individually—Use to add one or more cards that are not numbered
sequentially. See
“Adding Cards Individually” on page 29.
• Add by swiping—Use to add one or more cards after swiping them. See
“Adding a Card by Swiping It” on page 30.
Adding Cards Individually
You must add each card that people will use to access the door. You can assign a card
to only one person, but each person can have one or more cards.
Before you add a card, you must set up the format for your cards. For more
information, see
“Setting Up Card Formats” on page 27.
Note: Before a person can use a card to access the door, you must set up at least one
schedule and assign the schedule to the person. For more information, see
“Adding a
Schedule” on page 10 and “Assigning or Changing a Person’s Schedule” on page 23.
If you do not know the card format, you can add the card by swiping. For more
information, see
“Adding a Card by Swiping It” on page 30.
To add a card:
1 Click the Cards/PINs tab.
• The Cards/PINs tab displays.
2 Click the Add text link.
• The Add Card page displays.
3 From the Assign a Format drop-down list, select the card format that
corresponds to the type of card you want to assign.
• You cannot change the card format after you save this card. If you select
the wrong format, you must delete the card and add the card again.
• For more information, see “Setting Up Card Formats” on page 27.