HID FARGO HDP5000 User Guide - Manual (Page 29)

July 2013 Page 29 of 100
© 2012, 2013 HID Global Corporation. All rights reserved.
HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
4.7.14 Film Print Takeup Tension
Use the Print Takeup Tension to set the baseline for the film tension.
Note: Do not adjust the InTM Film Drive.
Figure 10 - Film Print Takeup Tension
4.7.15 Resin Heat Adjust
Use this adjustment for when the Black resin text and barcodes appear faded or too light/dark.
4.7.16 Sleep Time
This setting adjusts the time until the printer stops energizing the transfer roller conserving
energy. Disable is indicated with a
0 setting.
Note: The counter for this setting starts after Standby Time has elapsed.
4.7.17 Blush Point
The blush point is compensation during printing:
• There is no dye transfer.
• There is no a light gray line on a portion of the card.
• It should be white.
4.7.18 LCD Contrast
This setting adjusts the LCD panel brightness.
4.7.19 Using the Film Supply Transfer Tension Setting
Adjustments significantly change image length. Recommend only small adjustments due to
sensitivity.
Note: Adjustments affect flash and smudge.