HID iCLASS SE Encoder User Guide - Manual (Page 27)

Chapter
3
April 2014 PLT-01067, Version: A.3
Setup and Configuration
3.1 System Requirements
3.2 General Workflow
The following is the general workflow for setting up the iCLASS SE Encoder:
• Plug the iCLASS SE Encoder device to your PC.
• Plug the USB Flash Drive from iCLASS SE Encoder Kit to your PC.
• Install the iCLASS SE Encoder application and follow the wizard installation instructions.
• Launch the iCLASS SE Encoder application.
• Change the Default Administration keys from the factory when prompted (save plain text key
values in a secure archive).
• Install the Technology Plugins files when prompted.
• Install Formats, if required.
• Upload the Configuration file to install Credits (credentials).
• Load HID Keys to the iCLASS SE Encoder using the Key Manager.
• Create Custom keys (if desired)
• The iCLASS SE Encoder is now ready to start creating and executing Work Orders, and
configuring SE iCLASS readers.
Type Windows ®
Computer/Processor
300 MHz or higher Pentium-compatible CPU
USB Ports
Memory 1 GB of RAM or higher
Hard Disk 500 MB free space
Display BGA or higher resolution monitor
Software Environment Latest Operating System service pack