HID iCLASS SE Encoder User Guide - Manual (Page 82)

Work Order Manager Page 5-34
PLT-01067, Version: A.3 April 2014
4. Memory Map Selection: Select card configuration and location where the data will be written.
Click Next.
Field Description
Application ID
Enter the 3-byte Application ID your company has registered with NXP, in
hexadecimal form.
File Number Select the file number (Range 0-31).
File Type Standard Data File is the only supported option.
File Size (bytes) Select the file size in bytes. Default is 16 bytes.
File Communication
Settings
Ciphered is the only supported option.
Key Change Mode
To change a key, requires authentication with the following: Master Key, Key 1-13,
Authenticate with key to be changed, or Do not allow keys to be changed
PICC Master Key
Properties Select the PICC Master Properties from the list.
Note: These options can only be managed when working with a blank card.
Application Master
Key Properties
Select the Application Properties from the list.