During first start-up before startup, Operation – Karcher BRS 43-500 C User Manual

Page 13

Advertising
background image

– 3

Figure 1, see cover page

Remove the appliance and the push
handle from the packaging and assem-
ble as shown in the illustration.

Figure 2, see cover page

Connect a cable between the appliance
and the push handle.

Slide the connector into the push han-
dle.

Figure 3, see cover page

When inserting the push handle into the
appliance, adjust the cable through the
slot in the push handle so that it is not
pinched.

Figure 4, see cover page

Slide the push handle all the way onto
the appliance.

Thread in the 4 included screws and
tighten them.

Fill water into the detergent tank.

Insert the mains plug into the socket.

Set the appliance switch to "I".

Press and hold the key for the detergent
solution and flush the water system.

Set the appliance switch to "0".

Disconnect the main plug from the
socket.

Place the slider vertically and arrest.

Tilt the appliance backward and store it
on the pushing handle.

Place the brush roller onto the driver
and lock into place on the opposite side.

ƽ

Danger

Danger of injury by electric shock.
Check the mains cables of the machine
each time before using the machine to see
that it is not damaged. Never operate a ma-
chine with damaged cables. Get the dam-
aged cables replaced by an electrician.

Risk of injury on account of electric shock
caused by a damaged mains cable. Do not
let the mains cable come in contact with the
rotating brushes or pads.
Note
To put the brush drive out of operation im-
mediately, move the appliance switch to
"0".

Place the slider vertically and arrest.

Tilt the appliance toward the back and
drive it to the place of use on its trans-
port wheels.

Caution
Risk of damage. Only use the recommend-
ed detergents. With respect to different de-
tergents the operator bears the increased
risk regarding the operational safety, acci-
dent risk and reduced product life of the ap-
pliance. Only use detergents that are free
from solvents, hydrochloric acid and hydro-
fluoric acid.
Follow the safety instructions for using de-
tergents.
Do not process any inflammable, explo-
sive, corrosive or poisonous consumables.
Note
Observe the dosing notes.
Recommended detergents:

Dosage 6%:

During first start-up

Before Startup

Installing the Brushes

Operation

Drive the machine

Filling in detergents

Application

Detergent

Intermediate carpet
cleaning

RM 768 iCapsol

Fill quantity water
[litres]

Fill quantity of deter-
gent – 768 [ml]

1

60

2

120

3

180

4

240

5

300

6

360

7

420

13

EN

Advertising
This manual is related to the following products: