AMS Neve 4081 - Manual (Page 17)

4081 User Manual Issue 2
Installing the software – Mac
The install procedure below is for Mac software version 10.4 or later.
> At any point in the install, you can return to the previous screen by
click Back
.
If you have a different version of software installed, there may be subtle
differences on the screens shown below, but the basic install is still the
same.
> Double click on the icon called Remote Mic Control.pkg and the
install program will open with the Welcome screen.
> Click Continue.
The Information screen will display where the software will be installed
on the Mac.
> Click Continue.
The License Agreement screen will open.
> Click Continue.
You will be asked to confirm that you have read the agreement.
> Click Agree.
If you click Disagree, the Install procedure will terminate.
You will be asked to select a location to install the software to.
> Click on Macintosh HD as shown left, so a green arrow is placed on
the drive on-screen (depending on the number of drives in your
system, this may be done automatically for you).
> Click Continue.
- 17 -
If you are installing this
software over a
previously installed
version, you MUST
uninstall the previous
version first before you
replace it with the
newer version.