Acnodes PCH 5120 - Manual (Page 26)

14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
PCH 5120
12.1” industrial Panel PC
IP67 rated fully enclosure
3.7.1 M12 CONNECTION
All the optional cables attach to the PCH5120 with M12 connectors. The optional cables have M12 connec-
tors at the one end and the standard connectors at the other end.
To attach the M12 connector, align it with the slot and tighten by turning clockwise.
3.7.2 LAN CONNECTION CABLE
The RJ-45 connectors enable connection to an external network. To connect a LAN cable with an RJ-45
connector, please follow the instructions below.
Step 1: Locate the RJ-45 connector on the bottom panel.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of the RJ-45 connec-
tors on the bottom panel. See Figure 3-13..