AMF KX PLUS - Manual (Page 2)

KX PLUS BUN DIVIDER
Electronic proofer synchronization kit with proofer
drive
Stainless Steel, NEMA-4 rated Operator Station can be
mounted on divider, rounder, or proofer tower
Operator Panel includes the following:
•
Allen Bradley PanelView 550 keypad operator inter
face to control:
Stuffing Pump Pressure Set Point
Metering Pump speed
Knife speed
Alarm Messages
Product Codes
• Allen Bradley Push-buttons for:
Two-button start
Stop
Emergency stop
• NEMA-12 remote electrical enclosure including:
Main disconnect switch
Allen Bradley 5/03 PLC
Toshiba Inverters
Closed loop pressure control system with
pressure transducer
• Designed and manufactured in accordance with
BISSC standards
• Heavy duty stainless steel frame for durability and
corrosion resistance
• Polished stainless steel guards and 100 lb. hopper
for easy sanitation
• Single Auger Stuffing Pump with Stainless Steel
Housing for durability and maximum pumping
efficiency with minimal temperature increase
• Stuffing Pump drives are direct coupled, no chains
or pulleys
• All Nord Severe Duty Gearmotor Drives
• Stainless Steel metering pump for precise, linear
flow control with ultra low shear peristaltic action
• EZ Flow Distribution and scaling manifold features
internal flow diverters to precisely balance flow
without additional back pressure.
• UHMW cut-off knives slice cleanly, without tearing
gluten strands
• Precise doughball placement at any speed
• Easy access to all operational areas, no tools
required for sanitation
• Manually actuated divider pushback employs a large
air cylinder for slow, steady movement of divider
from rounder and allows for easy maintenance and
sanitation access to the cut-off area
• Venturi-style vacuum system provides for efficient
pumping and degassing
Electrical
Features
Mechanical
Features