Sony CDX-H905iP - Manual (Page 16)

16
Tip
Other equalizer types are also adjustable.
Adjusting setup items — SET
1
Press and hold (SELECT).
The setup display appears.
2
Press (SELECT) repeatedly until the
desired item appears.
3
Rotate the volume control dial to
select the setting (example “ON” or
“OFF”).
4
Press and hold (SELECT).
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
“
z
” indicates the default settings.
CLOCK-ADJ (Clock Adjust) (page 7)
CT* 1 (Clock Time)
To set “CT-ON” or “CT-OFF” (
z
) (page 12, 13).
BEEP
To set “BEEP-ON” (
z
) or “BEEP-OFF.”
AUX-A* 2 (AUX Audio)
To turn the AUX source display “AUX-A-ON”
(
z
) or “AUX-A-OFF” (page 18).
A.OFF (Auto Off)
To shut off automatically after a desired time
when the unit is turned off: “A.OFF-NO” (
z
),
“A.OFF-30S (Seconds),” “A.OFF-30M
(Minutes)” or “A.OFF-60M (Minutes).”
REAR/SUB* 2
To switch the audio output.
– “REAR-OUT” (
z
): to output to a power
amplifier.
– “SUB-OUT”: to output to a subwoofer.
DEMO (Demonstration)
To set “DEMO-ON” (
z
) or “DEMO-OFF.”
DIM (Dimmer)
To change the brightness of the display.
– “DIM-AT” (
z
): to dim the display
automatically when you turn lights on.
– “DIM-OFF”: to deactivate the dimmer.
– “DIM-ON”: to dim the display.
CONTRAST
To adjust the contrast of the display.
The contrast level is adjustable in 7 steps.
ILM (Illumination)
To change the illumination color: “ILM-1” (
z
)
or “ILM-2.”
M.DSPL (Motion Display)
To select the Motion Display mode.
– “M.DSPL-LM” (
z
): to show moving patterns
and level meter.
– “M.DSPL-OFF”: to deactivate the Motion
Display.
– “M.DSPL-ON”: to show moving patterns.
A.SCRL (Auto Scroll)
To scroll long displayed item automatically
when the disc/album/group/track is changed.
– “A.SCRL-ON” (
z
): to scroll.
– “A.SCRL-OFF”: to not scroll.
LOCAL (Local seek mode)
– “LOCAL-OFF” (
z
): to tune normal reception.
– “LOCAL-ON” : to only tune into stations with
stronger signals.
MONO* 3 (Monaural mode)
To improve poor FM reception, select monaural
reception mode.
– “MONO-OFF” (
z
): to hear stereo broadcast in
stereo.
– “MONO-ON”: to hear stereo broadcast in
monaural.
REG* 1 * 3 (Regional)
To set “REG-ON” (
z
) or “REG-OFF” (page 13).
LPF* 4 (Low Pass Filter)
To select the subwoofer cut-off frequency: “LPF
OFF” (
z
), “LPF125Hz” or “LPF 78Hz.”
LOUD (Loudness)
To allow you to listen clearly at low volume
levels.
– “LOUD-ON” : to reinforce bass and treble.
– “LOUD-OFF” (
z
): to not reinforce bass and
treble.
BTM (page 11)
*1 CDX-HR905IP only.
*2 When the unit is turned off.
*3 When FM is received.
*4 When the audio output is set to “SUB.”