Agilent Technologies U2751A - Manual (Page 33)

Getting Started 1
U2751A User’s and Service Guide 17
Chassis Installation
The L -Mount kit is to be installed to your U2751A module.
The following instructions describe the simple procedure of
installing the L
-Mount kit and your module in the U2781A
chassis.
1 Unpack the L-Mount kit from its packaging.
2 Remove your U2751A module from the bumper casing.
3 Using a Phillips screwdriver, fasten the L-Mount kit to
your U2751A module.
4 Insert your U2751A module into the U2781A chassis with
the 55 -pin backplane connector positioned at the bottom
of the module.
5 Once you have slotted the module into the chassis, tighten
the screws of the L -Mount kit to secure the connection.