Agilent Technologies U2751A - Manual (Page 40)

24 U2751A User’s and Service Guide
2 Operation and Features
Relay Cycle Counter
Agilent Measurement Manager Operation
At the main panel, select the Relay Cycle Counter tab. The
panel in Figure 2- 3 will be displayed. The keyboard shortcut
key is Ctrl+R.
This feature allows the user to carry out preventive
maintenance, which is to replace those relays that are at the
end of their life span.
Relay cycles that are above a certain limit will be highlighted
in red. Refer to the example in
Figure 2- 3 .
Figure 2-3 Panel view of the relay cycle counter