Setting af and ta/tp, Selecting pty, Setting ct – Sony CDX-S2050V User Manual

Page 8: Setting af and ta/tp selecting pty setting ct, Setting af and ta/tp 1, Selecting pty 1, Setting ct 1

Advertising
background image

8

CDX-S2050V/S2050C/S2050

2-348-403-21 (1)

H:\Data Disk\2348403211\234840321CDXS2050VEUR\01GB02CD-EUR.fm

masterpage:Left

Notes
Depending on the country/region, not all RDS

functions may be available.

RDS will not work if the signal strength is too weak,

or if the station you are tuned to is not transmitting
RDS data.

Setting AF and TA/TP

1

Press

(AF/TA)

repeatedly until the

desired setting appears.

Storing RDS stations with the AF and
TA setting

You can preset RDS stations along with the AF/
TA setting. If you use the BTM function, only
RDS stations are stored with the same AF/TA
setting.
If you preset manually, you can preset both RDS
and non-RDS stations with the AF/TA setting for
each.

1

Set AF/TA, then store the station with BTM or
manually.

Presetting the volume of traffic
announcements

You can preset the volume level of the traffic
announcements so as to not miss hearing them.

1

Press the volume +/– button repeatedly to
adjust the volume level.

2

Press and hold (AF/TA) until “TA” appears.

Receiving emergency
announcements

With AF or TA on, the emergency
announcements will automatically interrupt the
currently selected source.

Staying with one regional
programme — REG

When the AF function is on: this unit’s factory
setting restricts reception to a specific region, so
you will not be switched to another regional
station with a stronger frequency.

If you leave this regional programme’s reception
area, set “REG-OFF” in setup (page 9).

Note
This function does not work in the UK and in some
other areas.

Local Link function (UK only)

This function enables you to select other local
stations in the area, even if they are not stored on
your number buttons.

1

During FM reception, press a number button
((1) to (6)) on which a local station is stored.

2

Within 5 seconds, press again a number button
of the local station.
Repeat this procedure until the local station is
received.

Selecting PTY

1

Press

(PTY)

during FM reception.

The current programme type name appears if
the station is transmitting PTY data.

2

Press

(PTY)

repeatedly until the

desired programme type appears.

3

Press

(SEEK)

+/–.

The unit starts to search for a station
broadcasting the selected programme type.

With the card remote commander
In step 2, to select the programme type, press

M

or

m

.

Type of programmes

Note
You cannot use this function in countries/regions
where no PTY data is available.

Setting CT

1

Set “CT-ON” in setup (page 9).

Notes
The CT function may not work even though an RDS

station is being received.

There might be a difference between the time set by

the CT function and the actual time.

Select

To

AF-ON

activate AF and deactivate TA.

TA-ON

activate TA and deactivate AF.

AF, TA-ON

activate both AF and TA.

AF, TA-OFF

deactivate both AF and TA.

NEWS

(News),

AFFAIRS

(Current Affairs),

INFO

(Information),

SPORT

(Sports),

EDUCATE

(Education),

DRAMA

(Drama),

CULTURE

(Culture),

SCIENCE

(Science),

VARIED

(Varied),

POP M

(Popular Music),

ROCK M

(Rock Music),

EASY M

(Easy

Listening),

LIGHT M

(Light Classical),

CLASSICS

(Classical),

OTHER M

(Other

Music Type),

WEATHER

(Weather),

FINANCE

(Finance),

CHILDREN

(Children’s

Programmes),

SOCIAL A

(Social Affairs),

RELIGION

(Religion),

PHONE IN

(Phone In),

TRAVEL

(Travel),

LEISURE

(Leisure),

JAZZ

(Jazz Music),

COUNTRY

(Country Music),

NATION M

(National Music),

OLDIES

(Oldies

Music),

FOLK M

(Folk Music),

DOCUMENT

(Documentary)

Advertising