ADS Technologies Wireless Cable Modem Gateway SBG1000 - Manual (Page 59)

53 SBG1000 User Guide
Home
X
Exit Print
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Gateway > PORT TRIGGERS — predefined Page
When you run a PC application that accesses the Internet, it communicates with a computer on the Internet. In
some applications, especially gaming, the computer on the Internet also communicates with your PC. Because
NAT does not normally allow these incoming connections, the SBG1000 supports port triggering.
The SBG1000 is preconfigured with port triggering for common applications. You can also configure additional
port triggers if needed. Configuring port triggers for an application requires:
•
The application transport protocol — TCP or UDP
•
The application port number
You can use the default values for the remaining parameters.
Only one PC at a time connected to the SBG1000 can use an application requiring port triggering. Use this page
to view predefined port triggers: