Sony IFU-HS1 - Manual (Page 10)

GB 4
Specifications
Input signals and input select of the
VPL-HS1
Exemple: To view the picture output from
the S VIDEO connector of the IFU-HS1 on
the projector, display the indication “S
VIDEO 2” on the screen by pressing INPUT
on the remote commander repeatedly.
Two sets of the Velcro tapes are supplied
with the IFU-HS1 for fixing it on the TV.
Use them if necessary.
1
Attach the Velcro tapes on the two
positions on the bottom of the IFU-
HS1.
2
Put the Velcro tapes on the position
you want to set the IFU-HS1, such as
on the TV.
3
Fit both the Velcro tapes to fix the
IFU-HS1.
When you attach the Velcro tapes, remove
any dust from the surface of them.
Specifications
Dimensions: 230 Ч 90 Ч 50 mm (without the
cable) (W × D × H)
Mass: Approx. 310 g (10 oz)
Supplied Accessory:
Multi cable 10 m (length), Velcro
tapes (2 sets; 4 pieces)
Video input connectors on
the IFU-HS1 (color of
each plugs) Input select of
the Projector
VPL-HS1
VIDEO 1
IN S VIDEO
connector (black
or yellow) S VIDEO 2
VIDEO
connector
(yellow/red/
white) VIDEO 2
VIDEO 2
IN Y P
B
/C
B
P
R
/C
R
connector
(green/blue/red)
INPUT A
VIDEO 3
IN S VIDEO
connector (black
or yellow) S VIDEO 2
VIDEO
connector
(yellow/red/
white) VIDEO 2
How to Use the Supplied
Velcro Tapes
Positions where the Velcro tapes should
be attached