Sony CDX-DAB500U - Manual (Page 21)

21
*1 When the unit is turned off.
*2 When FM is received.
*3 When the tuner is selected.
*4 During DAB reception.
*5 When the CD or USB is selected.
SOUND:
BEEP
Activates the beep sound: “ON,” “OFF.”
AUTO OFF
Shuts off automatically after a desired
time when the unit is turned off: “NO,”
“30S (Seconds),” “30M (Minutes),” “60M
(Minutes).”
AUX-A * 1 (AUX Audio)
Activates the AUX source display: “ON,”
“OFF” (page 23).
REAR/SUB * 1
Switches the audio output: “SUB-OUT”
(subwoofer), “REAR-OUT” (power
amplifier).
CT (Clock Time)
Activates the CT function: “ON,” “OFF”
(page 11).
REGIONAL * 2
Restricts reception to a specific region:
“ON,” “OFF” (page 11).
BTM * 3 (page 10)
ANNOUNCE (Announcement)
Enables broadcast announcements
(page 9).
FM LINK * 4
Searches for and tunes the same program
automatically when the signal of the
current program is too weak: “ON,”
“OFF.”
ANT-PWR (Antenna Power)* 1 * 4
Supplies power to the DAB antenna
(aerial) input terminal: “ON,” “OFF.”
AUTOSCAN * 4
Performs an auto scan to update the list
of services in Quick-BrowZer mode.
ZAPPIN * 5
ZAP TIME (Zappin Time)
Selects the playback time for the
ZAPPIN function.
– “Z.TIME-1 (about 6 seconds),”
“Z.TIME-2 (about 15 seconds),”
“Z.TIME-3 (about 30 seconds).”
ZAP BEEP (Zappin Beep)
Applies a beep sound between track
passages: “ON,” “OFF.”
EQ7 PRESET (page 18)
EQ7 SETTING (page 18)
POSITION
SET F/R POS (Set Front/Rear Position)
(page 19)
ADJ POSITION
* 1 (Adjust Position)
(page 19)
SET SW POS
* 1 * 2 (Set Subwoofer
Position) (page 19)
BALANCE
Adjusts the sound balance: “RIGHT-15”
– “CENTER” – “LEFT-15.”
FADER
Adjusts the relative level: “FRONT-15” –
“CENTER” – “REAR-15.”
DM+ * 3 (page 19)
LOUDNESS (Dynamic Loudness)
Reinforces bass and treble for clear
sound at low volume levels: “ON,”
“OFF.”
ALO (Automatic Level Optimizer)
Adjust the playback volume level of all
playback sources to the optimum level:
“ON,” “OFF.”