Sony KDL-32U2000 - Manual (Page 19)

19 GB
Using MENU Functions
Country Selects the country/region where you operate the TV.
Tip
The country/region in which you want to use the TV does not appear in the list, select
“-” instead of a country/region.
Auto Tuning Tunes in all the available analogue channels.
Programme Sorting Changes the order in which the analogue channels are stored on the TV.
1 Press F / f to select the channel you want to move to a new position,
then press g .
2 Press F / f to select the new position for your channel, then press .
AV Preset Assigns a name to any equipment connected to the side and rear sockets.
1 Press F / f to select the desired input source, then press .
2 Press F / f to select the desired option below, then press .
• AV1 (or AV2/ AV3/ AV4/ PC/ HDMI), VIDEO, DVD, CABLE, GAME, CAM, SAT :
Uses one of the preset labels to assign a name to connected equipment.
• “Edit”: Creates your own label.
• “Skip”: Skips an input source that is not connected to any equipment when you
press F / f to select the input source.
Sound Offset Sets an independent volume level to each equipment connected to the TV.
Manual Programme
Preset Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”, press
F
/
f
to
select the programme number you want to modify. Then, press .
System
Presets programme channels manually.
1 Press F / f to select “System”, then press .
2 Press
F
/
f
to select one of the following TV broadcast systems, then
press G .
B/G: For western European countries/regions
D/K: For eastern European countries/regions
L: For France
I: For the United Kingdom
Note
Depending on the country/region selected for “ Country ” (page 5), this option may not be
available.
Channel
1
Press F / f to select “Channel”, then press .
2 Press
F
/
f
to select “S” (for cable channels) or “C” (for terrestrial
channels), then press g .
3 Tune the channels as follows:
If you do not know the channel number (frequency)
Press
F
/
f
to search for the next available channel. When a channel has been found,
the search will stop. To continue searching, press
F
/
f
.
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the broadcast you want or
your VCR channel number.
4 Press to jump to “Confirm”, then press .
5 Press f to select “OK”, then press .
Repeat the procedure above to preset other channels manually.
Label
Assigns a name of your choice, up to five letters or numbers, to the selected channel.
AFT
Allows you to fine-tune the selected programme number manually if you feel that a
slight tuning adjustment will improve the picture quality.