Sony KLV-21SG2 - Manual (Page 45)

43 Other Functions
GB
Other Functions
Sleep Timer Function
To set the Sleep Timer function
Press on the remote control repeatedly until the desired time period (“30min,” “60min,” “90min,” or “120min”) appears on the
screen.
When the Sleep Timer function is on, the
/ (Standby/Sleep) indicator on the TV lights up in red.
To cancel the Sleep Timer function
Press repeatedly until “Off” appears on the screen.
The Sleep Timer function allows you to set the TV to switch itself automatically to the standby mode after a specified time
period. You can select the time period from among 30 minutes, 60 minutes, 90 minutes, and 120 minutes.
• If you switch off the TV and switch it on again, the Sleep Timer function is reset to “Off.”
• The message “Sleep timer will end soon. Power will be turned off.” appears on the screen one minute before the TV
switches to the standby mode.
• If you press / on the remote control, the remaining time in minutes before the TV switches to the standby mode
is displayed on the screen.