Sony KLV-21SG2 - Manual (Page 66)

64
Additional Information
Using Optional Equipment
For mono equipment
Connect the phono plug to the L/G/S/I jack and press / repeatedly until the input symbol 4 or 4 appears on the
screen.
Select the “Sound Adjustment” menu and set “Dual Sound” to “A” (see page 34).
“Memory Stick” input
To view still images or moving images stored on a “Memory Stick” inserted into the “Memory Stick” slot D, press
(“Memory Stick”) on the remote control.
The “Memory Stick Home” appears on the screen when you press
(“Memory Stick”).
For more details on using “Memory Stick” media, refer to “Using the “Memory Stick” (Memory Stick Home)” on page 53.
1
Connect your equipment to the designated TV socket, as indicated on pages 61 to 63.
2
Switch on the connected equipment.
3
To watch the picture of the connected equipment, press the / button on the remote control repeatedly until the correct
input symbol appears on the screen.
Symbol Input Signals
1 or 2 • Audio/video input signal through the Scart connector G or F.
1 • RGB input signal through the Scart connector G. This symbol appears only if an
RGB source has been connected.
2 • S video input signal through the Scart connector F.
3 • Component input signal through the Y, P
B
/C
B
, P
R
/C
R
jacks B and Audio input
signal through C.
4 • Video input signal through the phono jack K and audio input signal through L.
4 • S video input signal through the S video input jack J and audio input signal
through L.
4
Press the button on the remote control to return to the normal TV picture.
S
S
S