Sony KDL-W40A11E - Manual (Page 28)

28 GB
Features menu
Reduces the power consumption of the TV.
1
Press OK to select “Power Saving”.
2
Press M/m to select “Reduce”, then press OK.
Switches on/off the TV’s internal speakers.
1
Press OK to select “Speaker”.
2
Press M/m to select “On” or “Off”, then press OK.
On: The sound of the TV is output through the TV’s speakers.
Off: The sound of the TV is output through the external audio equipment connected to
the audio output sockets
.
Sets a signal to be output through the socket labelled / 2 on the rear of the TV. If
you connect a VCR or other recording equipment to the / 2 socket, you can then
record from the equipment connected to other sockets of the TV.
1
Press OK to select “AV2 Output”.
2
Press M/m to select one of the following, then press OK.
Auto: Outputs whatever is being viewed on the screen.
TV Analog: Outputs an analogue broadcast.
TV Digital: Outputs a digital broadcast.
AV1: Outputs signals from equipment connected to the
/ 1 socket.
AV3: Outputs signals from equipment connected to the / 3 socket.
AV6: Outputs signals from equipment connected to the 6/ 6 socket.
You can select the options listed below on the
Features menu. To select options, see “Navigating
through menus” (page 21).
Power Saving
Speaker
AV2 Output