APC DIGITAL KVM SWITCHES AP5610 User Manual
Page 129
117
Power consumption
30 Watts
AC-input power
40 Watts maximum
AC-input voltage rate 100 to 240 V AC autosensing
AC-input current
rating
1.25 A RMS maximum
AC-input cable
18 AWG three-wire cable:
IEC-320 C13 to 5-15P
IEC-320 C13 to IEC-320 C14
AC frequency
50 to 60 Hz autosensing
Ambient atmospheric condition ratings
Temperature
0
o
to 50
o
Celsius (32
o
to 122
o
Farenheit) operating
-40
o
to 70
o
Celsius (-40
o
to 158
o
Farenheit) nonoperating
Humidity
20 to 80% noncondensing operating
5 to 95% noncondensing nonoperating
Safety and EMC approvals and markings
UL, FCC, cUL, ICES-003, CE, VCCI, GOST, IRAM, C-Tick, MIC
Safety certifications and EMC certifications for this product are obtained
under one or more of the following designations: CMN (Certification Model
Number), MPN (Manufacturer’s Part Number) or Sales Level Model
designation. The designation that is referenced in the EMC and/or safety
reports and certificates are printed on the label applied to this product
User Consoles
Type
PC running Windows NT, 2000 or XP OS and Network Access Software.
Minimum
Configuration
300MHz Pentium III,
64 MB RAM, 100BaseT NIC, XGA Video
Recommended
Configuration
450 MHz Pentium III,
128 MB RAM, 100BaseT NIC, SXGA Video
Table F.2: APC 2x1x32 and 8x1x32 KVM switch product specifications (Continued)