Sending macros, Selecting the macro group to display, To display macro groups in the macros menu – APC DIGITAL KVM SWITCHES AP5610 User Manual
Page 103
Chapter 6: Video Viewer 91
•
To change the macro group that is listed by default. This causes the macros in the specified
group to be available in the Video Viewer Macros menu.
Macro group selections are device-specific. The macro group can be set differently for each target
device.
Sending macros
To send a macro, select Macros from the Video Viewer menu and choose a macro from the list.
Selecting the macro group to display
Select the macro group applicable to the operating system of the target device.
To display macro groups in the Macros menu:
1.
Select Macros — Display on Menu from the Video Viewer menu.
2.
Select the macro group to list on the Video Viewer Macro menu.
3.
The macro group you select will be displayed in the Video Viewer Macros menu the next time
you open the Macros menu.