APC DIGITAL KVM SWITCHES AP5610 - Manual (Page 31)

Chapter 3: Basic Operations 19
Configuring The KVM Switch And The OSD
To configure the KVM switch and the OSD interface:
Start the OSD and click Setup.
The following table describes the options in the Setup window.
Alt+O
Click OK and return to the previous window.
Alt+port number
Select a target device to be scanned; port number is the port number of the
target device.
Enter Completes a switch in the Main window and exits the OSD interface.
Print Screen, Backspace Return to the previously selected target device.
Print Screen, Alt+0 Disconnect the user from the selected target device. The zero must be typed
on the main keyboard, not the numeric keypad.
Print Screen, Pause Start the screen saver immediately and lock the user, if it is
password-protected.
Up Arrow or Down Arrow Move the cursor from line to line in a list.
Right Arrow or Left Arrow When editing text in a field: Move within the text in the field.
All other conditions: Move the cursor from column to column in a list.
Page Up or Page Down Page through a list or help window.
Home or End Move the cursor to the top or bottom of a list.
Delete Delete the selected characters in a field or the selected item in the scan list.
For more information about scan lists see Scanning The Switching System
on page 31.
Table 3.2: OSD interface navigation basics (Continued)
Key, key combination, or
mouse action
Result