To broadcast to selected target devices, To turn broadcasting off – APC DIGITAL KVM SWITCHES AP5610 User Manual
Page 46
Chapter 3: Basic Operations 34
To broadcast to selected target devices:
1.
Complete one of the following steps:
•
From the Broadcast window, select the Mouse or Keyboard checkboxes for the target
devices that are to receive the broadcast commands.
•
Press the
Up
or
Down
Arrow keys to move the cursor to the target device. Then press
Alt+K
to select the Keyboard checkbox or
Alt+M
to select the Mouse checkbox. Repeat for
additional target devices.
2.
Click OK to save the settings and return to the Setup window, or click X or press
Escape
to
return to the Main window.
3.
Click Commands. The Commands window opens.
4.
Select the Broadcast Enable checkbox to activate broadcasting. The Broadcast Enable
Confirm/Deny window opens.
5.
Click OK to enable the broadcast, or click X or press
Escape
to cancel and return to the
Commands window.
6.
If broadcasting is enabled, type the information or perform the mouse movements that you
want to broadcast from the user station. Only target devices in the list are accessible. The other
user is disabled when broadcast mode is enabled.
To turn broadcasting off:
From the Commands window, clear the Broadcast Enable checkbox.