APC DIGITAL KVM SWITCHES AP5610 - Manual (Page 72)

60
C H A P T E R
5
Web Interface
Once you have installed an APC KVM switch, you have the ability to view and configure unit
parameters, determine who has access and control rights, view and control currently active video
sessions and execute a variety of control functions such as rebooting and upgrading your KVM
switch from the web interface. The web interface has four tabs: Connections, Configure, Status and
Tools.
Accessing Servers From The Web Interface
The Connections tab in the web interface allows you to view the connected servers and their status.
You may click on a server name to launch the Video Viewer.
To launch the web interface, see Launching the web interface on page 10.
Viewing and Configuring KVM Switch Settings
The Configure tab displays a list of categories covering a wide range of parameters for your KVM
switches. When a category is selected from the list, the settings associated with the category are
read from the unit. You can then modify the settings and send the changes securely back to the
KVM switches.
To change the network settings:
1. In the web interface, click the Configure tab.
Table 5.1: Web Interface Server Status Symbols
Symbol Description
Server is online
Server is offline
Server is unavailable