AEG SCT71900S0 - Manual (Page 21)

1. If necessary cut the adhesive sealing
strip and then apply it to the appliance
as shown in figure.
2. Drill the hinge cover A, as shown in fig-
ure.
Apply the covers A and A1 (in the acces-
sories bag) in to the middle hinge.
3. Install the appliance in the niche.
Push the appliance in the direction of
the arrow (1) until the upper gap cover
stops against the kitchen furniture.
Push the appliance in the direction of
the arrow (2) against the cupboard on
the opposite side of the hinge.
x
x
A1 A
1
2
Installation 21