AEG SCT71900S0 - Manual (Page 7)

2 Fridge ON/OFF switch
3 Fridge temperature regulator, + button
4 Fridge temperature indicator
5 Fridge temperature regulator, - button
6 DYNAMICAIR indicator
7 DYNAMICAIR button
8 Appliance Pilot light
9 Appliance ON/OFF switch
10 Freezer temperature regulator, + button
11 Freezer temperature indicator
12 Freezer temperature regulator, - button
13 FROSTMATIC indicator
14 FROSTMATIC button
15 Alarm indicator
16 Alarm reset button
Switching on
1. Insert the plug into the mains socket.
2. Press ON/OFF switch .
3. The Pilot Light will light up.
4. The alarm indicator light flashes since the temperature is reached.
The acoustic alarm sounds.
5. Press the alarm reset button to reset the alarm.
Switching off the fridge
1. Keep ON/OFF switch pressed for more than 5 seconds.
2. A countdown on the temperature indicator, from -3 -2 -1 will be shown. When “1” ap-
pears the fridge is turned off. The temperature indicator switches off. The Pilot light
switches off.
Switching off the appliance
1. Keep ON/OFF switch pressed for more than 5 seconds.
2. A countdown on the temperature indicators, from -3 -2 -1 will be shown. When “1”
appears the appliance is turned off. The temperature indicators switch off. The Pilot
lights switch off.
High temperature alarm
In the event of an abnormal temperature rise inside the freezer (e.g. power cut) alarm indi-
cator light will start to flash and a buzzer will sound.
Push the alarm reset button to stop the buzzer sound, while the alarm indicator light will
continue to flash.
The buzzer will stop automatically when the temperature has returned to normal while the
alarm indicator light will continue to flash.
Control panel 7