Ariens SNO-THRO 932102 - 520 - Manual (Page 22)

GB - 22
To obtain a complete parts manual, find your
model and serial number. Then go to
www.ariens.com or call 1-800-678-5443.
Engine stops. 1. Out of fuel.
2. Mechanical jam in blower
rake or impeller.
3. Polluted fuel supply.
4. Faulty spark plug.
1. Fill fuel tank.
2. Turn off engine, remove key,
and wait for all moving parts
to stop. Check for and
remove obstruction and
repair before restart.
3. Replace with clean fuel.
4. Replace or clean spark plug.
Engine problems. See Engine Manual.
Unit does not
throw snow 1. Shear bolts broken.
2. Attachment clutch/brake
not adjusted properly.
3. Attachment drive belt worn
or damaged.
1. Replace shear bolts (see
Shear Bolts).
2. Adjust attachment clutch/
brake (see Attachment
Clutch / Brake Adjustment).
3. Replace attachment drive
belt (see Attachment Drive
Belt Replacement ).
TROUBLESHOOTING
PROBLEM PROBABLE CAUSE CORRECTION
ACCESSORIES
See your authorized Ariens dealer to add
the additional accessories available for your
Sno-Thro.
Part No. Description
73203100 Slicer Bar
72200600 120 Volt Starter Kit
(932102)
73202500 240 Volt Starter Kit
(932310)
SERVICE PARTS
Be sure to always use genuine Ariens parts
to keep your Sno-Thro running like new.
Part No. Description
53200500 Shear Bolt Replacement Kit
03243659 Scraper Blade (932102)
03243259 Scraper Blade (932103, 310)
07211400 Impeller Belt
21533400 Spark Plug (932102)
21533500 Spark Plug (932103, 310)