Sony XNV-660BT - Manual (Page 75)

75
For problems with the navigation function, refer to
the leaflet (supplied by TomTom) for the navigation
module.
Error displays/messages
No sound is output during audio streaming.
The connected Bluetooth device is paused.
t Cancel pause of the Bluetooth device.
The sound skips during audio streaming.
• Reduce the distance between the unit and the
Bluetooth device.
• If the Bluetooth device is stored in a case which
interrupts the signal, remove the case while using.
• Several Bluetooth devices or other devices which
emit radio waves are used nearby.
t Turn off the other devices.
t Increase the distance from the other devices.
• The playback sound stops momentarily when this
unit is connecting to a cellular phone. This is not a
malfunction.
You cannot control the connected Bluetooth
device during audio streaming.
Check that the connected Bluetooth device supports
AVRCP.
Some functions do not work.
Check that the connecting device supports the
functions in question.
The name of the other party does not appear
when a call is received.
• The other party is not stored in the phonebook.
t Store in the phonebook (page 45).
• The calling phone is not set to send the phone
number.
A call is answered unintentionally.
• The connecting phone is set to start a call
automatically.
• “Auto Answer” of this unit is set to “Short” or
“Long” (page 49).
Pairing failed due to time out.
Depending on the connecting device, the time limit for
pairing may be short. Try completing the pairing
within the time by setting a single digit passkey.
Bluetooth function cannot be operated.
Turn off the unit by pressing (SOURCE/OFF) for 1
second, then turn on the unit.
No sound is output from the car speakers
during handsfree call.
If the sound is output from the cellular phone, set the
cellular phone to output the sound from the car
speakers.
Navigation function
Nothing appears on the display when
switching to the navigation display.
Turn the ignition off and then turn to the ACC position,
or press the reset button (page 17).
Bluetooth device is not found.
The unit cannot detect a connectable Bluetooth device.
t Check the Bluetooth setting of the connecting
device.
Busy now… Please try again.
The unit is busy.
t Wait for a moment and try again.
Cannot read.
• The unit cannot read the data due to some problem.
• The data is damaged or corrupted.
Cannot read disc. Disc may be corrupted.
• The disc is corrupted.
• The disc is incompatible with this unit.
• The disc is not finalized.
Disc Error
• The disc is dirty or inserted upside down.
t Clean or insert the disc correctly.
• A blank disc has been inserted.
• The disc cannot play due to a problem.
t Insert another disc.
• The disc is not compatible with this unit.
t Insert a compatible disc.
• Press Z to remove the disc.
Disc Reading...
The unit is reading all file/album (folder) information
on the disc.
t Wait until reading is complete and playback starts
automatically. Depending on the disc structure, it
may take more than a minute.
Error
• USB device was not automatically recognized.
t Reconnect it again.
• Phonebook content is changed during cellular phone
access.
t Access the phonebook again.
• Phonebook access is disconnected by the cellular
phone.
t Access the phonebook again.
• Phonebook download of the cellular phone failed due
to a problem.
t Download the phonebook again (page 45).
• Phonebook browsing of the cellular phone failed due
to a problem.
t Retry browsing (page 46).
• Phonebook listing of the cellular phone failed due to
a problem.
t Retry listing (page 46).
Error - Please select ‘initialize’ from the
Bluetooth settings menu.
A memory error has occurred.
t Initialize the Bluetooth setting (page 49).
Handsfree device is not available.
A cellular phone is not connected.
t Connect a cellular phone (page 42).
Hubs not supported.
USB hub is not supported on this unit.
continue to next page t