Radio reception, Usb playback – Sony DSX-A30 User Manual

Page 20

Advertising
background image

20

The Auto Off function does not operate.
 The unit is turned on. The Auto Off function

activates after turning off the unit.
– Turn off the unit.

The display disappears while the unit is
operating.
 The Black Out function is set to on (page 15).

Remote commander operation is not
possible.
 If the Black Out function is activated (no

lighting), remote commander operation is not
possible (page 15).

Radio reception

The stations cannot be received.
The sound is hampered by noises.
 The connection is not correct.

– Connect a power antenna (aerial) control

lead (for non-Argentine models: blue/white
striped, for Argentine models: blue) or
accessory power supply lead (red) to the
power supply lead of a car’s antenna (aerial)
booster (only when your car has built-in
radio antenna (aerial) in the rear/side glass).

– Check the connection of the car antenna

(aerial).

– If the auto antenna (aerial) will not go up,

check the connection of the power antenna
(aerial) control lead.

 The tuning step setting has been erased.

– Set the tuning step again (page 4).

Preset tuning is not possible.
 Store the correct frequency in the memory.
 The broadcast signal is too weak.

Automatic tuning is not possible.
 The broadcast signal is too weak.

– Perform manual tuning.

RDS

PTY displays “- - - - - - - -.”
 The current station is not an RDS station.
 RDS data has not been received.
 The station does not specify the program type.

USB playback

You cannot play back items via a USB hub.
 This unit cannot recognize USB devices via a

USB hub.

Cannot play back items.
 A USB device does not work.

– Reconnect it.

The USB device takes longer to play back.
 The USB device contains files with a

complicated tree structure.

The sound is intermittent.
 The sound may be intermittent at a high-bit-

rate of more than 320 kbps.

Advertising