Sony VPL-CX70 - Manual (Page 18)

GB 18
Location and Function of Controls
You can use a laser pointer or control the
presentation file made by Microsoft
PowerPoint when projecting the picture
using the Air Shot.
1 Laser transmitter
2 LASER key
Emits a laser beam from the laser
transmitter while you keep this key
pressed.
3 SLIDE G / g key
Used to change pages of the slide show
in the forward/backward direction.
4 B key
This key corresponds to the “B” key of a
keyboard.
When you press this key during the slide
show, a black screen is displayed. To
cancel the black screen, press this key
again.
To install batteries
Notes on laser beam
• Do not look into the laser transmitter.
• Do not aim the laser at people.
Notes on Remote Commander/
Presentation tool operation
• Make sure that nothing obstructs the
infrared beam between the Remote
Commander/Presentation tool and the
remote control detector on the projector.
Direct the Remote Commander/
Presentation tool toward the front or rear
remote control detector.
• The operation range is limited. The shorter
the distance between the Remote
Commander/Presentation tool and the
projector is, the wider the angle within
which the commander can control the
projector becomes.
Presentation Tool (VPL-CX75
only)
LASER
B
SLIDE
1
2
3
4
Open the cover (2) with a coin (1) and
remove the battery case (3). Install the two
size AAA (R03) batteries with the correct
polarity.