Sony VPL-PS10 User Manual
Page 17
17
(GB)
8
RESET key
Resets the value of an item to its factory preset value
or returns the enlarged image back to its original size.
9
D ZOOM +/– key
Enlarges the image at a desired location on the screen.
This key works only when a signal from a computer is
input.
+: Pressing the + key once displays the icon. This
icon indicates the point you want to enlarge. Use
an arrow key (
M/m/</,) to move the icon to
the point to be enlarged. Press the + key
repeatedly until the image is enlarged to meet
your requirements.
–: Each press of the – key reduces an image that has
been enlarged with the D ZOOM + key.
0
L (left) CLICK key
Functions as the left button of a mouse.
qa
MENU key
qs
D KEYSTONE key
Corrects the trapezoidal distortion caused by the
projection angle. Use the arrow keys (
M/m/</,) to
display the image as a rectangle.
qd
INPUT key
qf
FREEZE key
Used to freeze the picture projected. To cancel the
frozen picture, press the key again.
qg
MS SLIDE key
This key does not operate with this unit.
qh
Infrared transmitter
Battery installation
1
Push and slide to open the lid, then install the two
R6 (size AA) batteries (supplied) with the correct
polarity.
2
Replace the lid.
Notes on batteries
• Make sure that the battery orientation is correct when
inserting batteries.
• Do not mix an old battery with a new one, or
different types of batteries.
• If you do not intend to use the Remote Commander
for a long time, remove the batteries to avoid damage
from battery leakage. If batteries have leaked,
remove them, wipe the battery compartment dry and
replace the batteries with new ones.
Notes on Remote Commander operation
• Make sure that there is nothing to obstruct the
infrared beam between the Remote Commander and
the remote control detector on the projector. Direct
the Remote Commander toward the front or rear
remote control detector.
• The operation range is limited. The shorter the
distance between the Remote Commander and the
projector is, the wider the angle within which the
commander can control the projector.
Be sure to install
the battery from
the
#
side.
Slide while pressing
down on the lid.
Location and Function of Controls