Aiwa XD-DV380U - Manual (Page 14)

14
ENGLISH
AIWA XD-DV380U 8B-AV3-905-01 (010209AMK-Y-L)
CONNECTIONS (CONTINUED)
E Connecting to an AV receiver equipped with a DTS decoder
Use either a commercially available optical cord or a 75 ohm coaxial cord when connecting the unit to an AV receiver with
a Digital In jack. The supplied video cord is also available instead of a coaxial cord.
Rear of the unit
NOTE
If picture noise appears while playing copy-protected DVDs,
connect the unit directly to a TV. Do not connect through a
VCR, TV/VCR, or AV selector.
CAUTION
When connecting an AV receiver not equipped with a DTS
decoder using an optical or coaxial connecting cord, do
not select “Stream/PCM” in the “Digital Audio Output” of
the setup menu.
Merely attempting to play a DVD may cause a screeching
noise which could be harmful to your ears and damage the
speakers. In such a case, be sure to select “PCM” in the
“Digital Audio Output.”
to DIGITAL OUT
COAXIAL jack
or Coaxial cord
(not supplied)
Front
speaker (R) Front
speaker (L)
Center speaker Subwoofer Surround speaker (R) Surround speaker (L)
Video cord (supplied)
yellow
to the video input jack (yellow)
yellow
to VIDEO OUT
jack (yellow)
Optical cord (not supplied)
to DIGITAL OUT
OPTICAL jack
to the digital input jack
Receiver equipped with a
DTS decoder
Set the setup menu correctly after connecting!
Set the “TV Aspect” and “Digital Audio Output” of the setup
menu according to the audio equipment and TV connected
to the unit as follows:
(See “CHANGING SETUP VALUE” on page 38 for details.)
Digital Audio Output
Stream/PCM
TV Aspect
When your TV is a conventional-screen size TV:
4:3 Letter box
When your TV is a wide-screen size TV:
16:9 Wide
TV
to an AC outlet
When your TV is equipped with an S-video input terminal, see page 16.
R
DIGITAL
OUT
VIDEO
OUT
S-VIDEO
COMPONENT
S-VIDEO
OUT
VIDEO
OUT
DIGITAL
OUT
COMPONENT
VIDEO OUT
Pb
Pr
Y
AUDIO
OUT 2 AUDIO
OUT 1
COAXIAL
OPTICAL
L
R
L
R