Connections – Aiwa XD-DV380U User Manual

Page 9

Advertising
background image

ENGLISH

9

En

PREP

ARA

TIONS

AIWA XD-DV380U 8B-AV3-905-01 (010209AMK-Y-L)

Connection
type

A

on page 10

B

on page 11

C

on page 12

D

on page 13

F

on page 15

E

on page 14

Input jack of equipment to be
connected to the unit

Digital input jack

Analog audio input jacks (L/R)

Digital input jack

Analog audio input jacks (L/R)

Digital input jack

CONNECTIONS

Before making connections

• Connect the AC cords of the unit and any external

equipment last, after finishing all other connections.

• Insert the plugs completely into the jacks. Loose

connections may produce a humming sound or other
noise interference.

• When using an optical connection, remove the dust cap

from the DIGITAL OUT (OPTICAL) jack on the rear of
the unit. Keep the cap handy. When not using optical
connections, the dust cap should be replaced.

• Refer to the instructions of the connected equipment.

Before connecting, identify your type of audio equipment or TV referring to the following chart. Then, decide the connection
and the setup procedure accordingly.

CAUTION

Do not select “DOLBY DIGITAL/PCM” or “Stream/PCM
in the “Digital Audio Output” of the setup menu when
connecting to an AV receiver not equipped with a Dolby
Digital decoder or DTS decoder (with an optical or coaxial
connecting cord).
Merely attempting to play a DVD may cause a screeching
noise which could be harmful to your ears and damage
the speakers. In such a case, be sure to select “PCM” in
the “Digital Audio Output.”

Audio system to be connected

None (only a TV is connected)

A stereo system or an amplifier

An AV receiver equipped with Dolby Digital
decoder or a Dolby Digital decoder

An AV receiver equipped with DTS decoder
or a DTS decoder

NOTES

• The unit cannot be connected to a TV which is not equipped with a video input connector.
• Use a commercially available stereo-monaural audio cord when connecting to a monaural TV.

NOTES

• If picture noise appears while playing copy-protected

DVDs, connect the unit directly to a TV. Do not connect
through a VCR, TV/VCR, or AV selector.

• For speaker connection, refer to the instructions of the

AV receiver.

CONTINUE

Advertising