Sony VPL-VW100 - Manual (Page 50)

GB 50
Function menu
Function menu
The Function menu is used for changing the settings of the various functions
of the projector.
Auto Input Search Detects the input signal and displays the detected input signal
automatically when the INPUT button is pressed.
When set to “On,” the projector detects whether a Component,
HDMI, DVI, Video, S-Video or Input-A signal is input when the
INPUT button is pressed. Then the detected input channel is
automatically displayed. Set this to “Off” when you want to select a
channel with no input signal, or you want to switch the channel
manually.
Test Pattern Displays the test pattern.
When set to “On,” a test pattern appears on the screen to be used
when adjusting the lens with “Lens Focus,” “Lens Zoom,” and
“Lens Shift,” or correcting the screen proportions with “V
Keystone.” A test pattern does not appear when this item is set to
“Off.”
Standby Mode Lowers the power consumption in standby mode.
When set to “Low,” the power consumption in standby mode is
lowered.
Power Saving Sets the power saving mode.
When set to “On,” the projector goes into power saving mode if no
signal is input for 10 minutes. At that time, the POWER SAVING
indicator lights in orange. The screen becomes dark. In power saving
mode, the power saving mode is cancelled if a signal is input or any
button is pressed. If you do not want to set the projector to power
saving mode, select “Off.”
Test Pattern : Off
Auto Input Search : Off
Standby Mode : Standard
Power Saving: Off
Picture
Signal
Function
Setup
Installation
Information
Sel: Set: Back: Exit: