Sony SLV-N700 User Manual
Page 29
Getti
ng Sta
rted
29
Setting up the VCR Plus+® system (SLV-N700 only)
3
Press
M/m to move the cursor (B) to “Guide
channel setup,” then press OK.
4
The upper row shows VCR Plus+ guide channels and the lower row shows
TV channels or cable box out put channels. Press
</, to select the
channel number that does not match the guide channel.
5
• If you made Hookup 1 or 2: Enter the actual number on your TV (and
VCR), then press
M/m.
• If you made Hookup 3: Enter the cable box output channel (usually 2, 3,
or 4), then press
M/m.
6
Repeat steps 4 and 5 for each channel number that does not match.
7
Press OK to confirm the setting.
8
Press MENU to exit the menu.
OK
PLAY
GUIDE CHANNEL SETUP
Select
:
End
:
OK
Vv
Set
:
Bb
: MENU
Quit
Enter actual
receiving channel
v
[GUIDE CH]
[TV CH]
OK
PLAY
OK
PLAY
OK
PLAY
MENU