Sony SLV-N700 - Manual (Page 52)

52 Changing menu options
Changing menu options
Menu choices
Initial settings are indicated in bold print.
1 Press MENU.
2 Press M/m to move the cursor (B) to “Advanced
options,” then press OK.
3 Press M/m to move the cursor (B) to the option to change.
4 Press </, to change the setting.
5 Press MENU to exit the menu.
Menu option Set this option to
Tape select • T-120 when using a T-120 or shorter length tape.
• T-160 when using a T-160 length tape.
• T-180 when using a T-180 or longer length tape.
For details, see page 34.
Auto play • ON to start playback automatically, when you insert a tape
with its safety tab removed.
• OFF to turn off Auto play. You need to press H PLAY to
start playback, even if you insert a tape with its safety tab
removed.
Auto repeat • ON to play back a tape repeatedly. The VCR rewinds a tape to
the beginning and restarts playback automatically.
• OFF to turn off Auto repeat.
Auto power off • 1Hr to turn off the VCR automatically one hour after the last
operation.
• 2Hr to turn off the VCR automatically two hours after the last
operation.
• OFF to set no specific time to turn off.
Power save • ON to turn off the indicators in the display window during
standby mode to reduce the VCR’s power consumption to a
minimum.
• OFF to turn on the indicators in the display window while the
VCR is standing by.
VCR Output CH • 3CH when using channel 3 to receive the VCR signal.
• 4CH when using channel 4 to receive the VCR signal.
For details, see page 53.
Select
: End
:
ADVANCED OPTIONS
OK
Vv Set : Bb
Auto play:
Tape select:
Auto repeat:
ON
T1 2 0
OFF
[
[
[
]
]
]
Auto power off: OFF [ ]
OFF [ ]
: MENU Quit
Power save:
3CH [ ] VCR Output CH: