AGFA TM 14ADV - Manual (Page 64)

User’s Manual 3-11
PRINTING AND
PAPER HANDLING
Control Panel Functions
Setting MFF Paper Size ( )
Pressing puts the printer in MFF paper size mode
which allows you to inform the controller of the physical paper size
used in the MFF. You must select the size of paper currently loaded
in the MFF. This menu is available when the MFF is installed.
To select a paper size, follow these steps:
1. Make sure that the message display indicates READY with the
ONLINE and DATA indicators off.
2. Press the button for five or more seconds.
The message changes to MFF PAPER A4* . The asterisk
means that A4 size is selected for the MFF.
3. Select a desired paper size.
Press the or buttons until the desired paper size appears.
Press the
button. The asterisk appears and the paper size
is selected.
4. Save the selection.
Press the button to save the new setting and return to the
ready state.
READY MFF PAPER LETTER*
MFF PAPER XXXXX
or
MFF PAPER EXECUTIVE
MFF ENVELOPE COM10
MFF ENVELOPE XXXXX
MFF ENVELOPE B5
XXXXX: LEGAL
A4
A5
XXXXX: MONARCH
C5
DL
( )
05 Chapter 3 07.08.1997, 11:40 Uhr 11