AGFA TM 14ADV - Manual (Page 82)

User’s Manual 3-29
PRINTING AND
PAPER HANDLING
Feeding Paper Manually
The multi-function of this printer has a slot that allows you to feed
sheets manually one by one. Use the manual feed slot to print a
document on a different type of paper without unloading your regular
paper from the paper tray. You also use manual feed for printing
envelopes, overhead transparencies, and labels.
You can also use the manual feed slot built in the printer. The
procedure is the same. In this case, remove the multi-function feeder
from the printer as shown in the preceding page.
To use the manual feed slot, first select MANUALFEED ON using the
tray select mode of the control panel. Next, start your software
program to print a file. Then follow these steps:
1. Adjust the paper guides.
Position the left and right
upper guides to the width of
the sheet. (Lower two guides
are for paper stack.)
2. Place the sheet with print
side face up. When the
printer is ready to print, it
displays the message
Insert
size to prompt you to
prepare a sheet of paper.
Insert the sheet until it is
stopped by the feed rollers.
Insufficient insertion
prevents paper from being
fed or causes skewed feeding.
Release the paper once it begins to feed automatically. If your file has
additional pages, the printer prompts you for another sheet.
Handling Paper
05 Chapter 3 07.08.1997, 11:40 Uhr 29