Sony SLV-N70 - Manual (Page 54)

54 Setting up the VCR Plus+ GOLD system (SLV-N80 only)
To select the channel map
In this case, you have to select the channel map on the CHOOSE YOUR CABLE CH
MAP menu.
Notes
• It takes about one hour to complete channel mapping.
• The VCR can receive the program information signal only while the VCR is turned off and
no timer recordings are set.
• The VCR cannot set the guide channels correctly unless you enter the ZIP/POSTAL CODE in
your area.
• When you move to a different area, you must set up the VCR again and enter your new ZIP/
POSTAL CODE in the EASY SET UP procedure.
If the program information signal
in your area has several channel
map patterns (up to 8), the
CHOOSE YOUR CABLE CH
MAP menu appears:
• the first time you turn on the
VCR after completing channel
mapping
• after selecting AUTO and
pressing OK on the SMART
CHANNEL MAPPING menu
1 Find the VCR Plus+ GOLD system Channel Listing in your program guide. For
details, see page 51.
2 Press M/m to highlight the channel map number you want by checking the
channel number in the program guide.
3 Press OK.
MAP
MAP 1
2
MAP 3
MAP 4
MAP 5
MAP 6
MAP 7
MAP 8
KCET
WNET
ABC
FAM
A&E
KAET
CBS
1
4
1
9
2
2
2
–
5
3
8
0
3
9
4
–
– – – –
SET VCR Plus+ CHANNELS
CHOOSE YOUR CABLE CH MAP
SET :
SELECT :
OK
MENU
QUIT :
Channel map
number
Station ID
Channel number