Sony SLV-N70 - Manual (Page 38)

38 Setting up the cable box control (SLV-N80 only)
Setting up the cable box control
(SLV-N80 only)
(Skip this section if you are
using Hookup 3, 4, 5, or 6.)
Your VCR includes a cable box control
feature that allows the VCR to control most
brands of cable boxes or digital satellite
receivers via an optional Cable Mouse. With
the cable box control, the VCR controls
channels on the cable box or digital satellite
receiver for timer recording. You can also
use the VCR’s remote commander to change
channels on the cable box or digital satellite
receiver whenever the cable box or digital
satellite receiver is turned on even if the VCR
is turned off. To use cable box control, you
need to connect the Sony RM-CM101 Cable
Mouse (not supplied) (pages 11 and 14) and
set the code number and output channel.
This VCR is programmed with codes
necessary to control channel selection on
most brands of cable boxes or digital satellite
receivers at the time this VCR was
manufactured. It is possible that new cable
boxes may be introduced that cannot be
controlled with the RM-CM101 Cable
Mouse. If you have a cable box that is
incompatible with this VCR, contact your
cable operator –– they may be able to provide
you with a compatible cable box.
1 Press MENU, then press M/m to highlight
SETTINGS and press OK.
When using the EASY SET UP procedure,
skip steps 1 and 2.
1 2 3
4 5 6
7 8 9
0
MENU
Number
buttons
M / m
OK
MENU
PLAY
OK
SETTINGS
TUNER PRESET
SET VCR Plus+ CHANNELS
CABLE BOX CONTROL
CLOCK SET
LANGUAGE
RETURN
SET :
SELECT :
OK
MENU
QUIT :