Sony HT-9900M - Manual (Page 17)

Gettin
g
Star
ted
masterpage:Right
lename[E:\SEM_Janet\Revision_HT-
950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm]
Model name [HT-5950DP/HT-6900DP/HT-9900M/HT-9950M]
[2-549-736-12(1)]
17 US
Installing the speakers on the
wall
You can install your front, surround and
surround back speakers on the wall.
1
Prepare screws (not supplied) that are
suitable for the metal hook on the back
of each speaker. See the illustrations
below.
2
Fasten the screws to the wall. The
screws should protrude 5 to 7 mm (7/32
to 9/32 inch).
3
Hang the speakers on the screws.
Notes
• Use screws that are suitable for the wall material and
strength. As a plaster board wall is especially fragile,
attach the screws securely to a beam and fasten them
to the wall. Install the speakers on a vertical and flat
wall where reinforcement is applied.
• Contact a screw shop or installer regarding the wall
material or screws to be used.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
more than 4 mm
(5/32 inch)
more than 25 mm (1 inch)
Metal hook on the back of the speaker
4.6 mm
(3/16 inch)
10 mm
(13/32 inch)
5 to 7 mm
(7/32 to 9/32 inch)
Metal hook on the back of the speaker
4.6 mm
(3/16 inch)
10 mm
(13/32 inch)
US01COV_HT-5950DP-CA.book Page 17 Monday, April 11, 2005 11:37 AM