Sony D-NE900 - Manual (Page 28)

28
Stopping playback automatically
4
Turn VOL +/– to select the length
of time you want to set, then press
the jog lever to enter the selection.
(CD player: Turn the jog dial to
select the length of time you want
to set, then press DISPLAY/MENU
to enter the selection.)
• To increase/decrease by 5 minutes
(remote control only):
Turn VOL +/– repeatedly.
• To increase/decrease by 1 minute:
Keep turning VOL +/–. (CD player:
Keep turning the jog dial.)
To return to the previous screen
Press x. (CD player: Press –.)
To cancel the setting operation
Press DISPLAY or x for 2 seconds or more.
(CD player: Push the 5-way control key
toward x/CHG.)
To check the length of time before the
CD player stops playback
During play, perform steps 1 - 3.
To cancel the OFF TIMER function
Perform steps 1 - 3, changing the OFF
TIMER setting to “OFF.”
Locking the controls
(HOLD)
You can lock the controls on your CD player
to prevent accidental button presses.
The OPERATION lamp flashes if you press
any button when the HOLD function is
activated.
Slide HOLD in the direction of the
arrow.
You can use the HOLD function with both
the CD player and the remote control. You
can still operate your CD player using the
remote control when HOLD on the remote
control is set to off.
To unlock the controls
Slide HOLD in the direction opposite to that
of the arrow.
Note
Even if the HOLD function is working, “HOLD”
will not appear in the display of the remote control.
Turning off the beep
sound
You can turn off the beep sound that is heard
from your headphones/earphones when you
operate your CD player.
1
Press DISPLAY until the display
changes. (CD player: Press
DISPLAY/MENU until the MENU
screen appears. Turn the jog dial
to select “OPTION,” then press
DISPLAY/MENU.)