Sony D-NE900 - Manual (Page 29)

29
2
Flick the jog lever toward . or
> to select “BEEP,” then press
the jog lever to enter the selection.
(CD player: Turn the jog dial to
select “BEEP,” then press
DISPLAY/MENU to enter the
selection.)
3
Flick the jog lever toward . or
> to select “OFF,” then press
the jog lever to enter the selection.
(CD player: Turn the jog dial to
select “OFF,” then press DISPLAY/
MENU to enter the selection.)
To turn on the beep sound
Perform steps 1 - 3, changing the BEEP
setting to “ON.”
Saving power
You can select lighting options for the LCD
backlight on the remote control and the
OPERATION lamp on the CD player so that
you can save battery power.
1
Press DISPLAY until the display
changes. (CD player: Press
DISPLAY/MENU until the MENU
screen appears. Turn the jog dial
to select “OPTION,” then press
DISPLAY/MENU.)
2
Flick the jog lever toward . or
> to select “LIGHT,” then press
the jog lever to enter the selection.
(CD player: Turn the jog dial to
select “LIGHT,” then press
DISPLAY/MENU to enter the
selection.)
3
Flick the jog lever toward . or
> to select “LIGHT OFF” or
“LIGHT 2,” then press the jog lever
to enter the selection. (CD player:
Turn the jog dial to select “LIGHT
OFF” or “LIGHT 2,” then press
DISPLAY/MENU to enter the
selection.)
About the LIGHT setting
Setting OPERATION lamp LCD backlight
on the CD player
on the remote
control
LIGHT Turned off Turned off
OFF
LIGHT 1 Lights up fully Lights up for
during play about 5 seconds
or during when you press
operation a button and
also lights up
between tracks
LIGHT 2* Lights up with Lights up for
less brightness about 5 secnds
during play when you press
or during a button
operation
* You can save power by selecting “LIGHT 2”
rather than “LIGHT 1.”
The LCD backlight on the remote
control
The LCD backlight is always turned on when
you are using the AC power adaptor.
A
vailable featur
es