Sony VPCF1 Series Hard Disk Drive (Replacement Instructions) - Manual (Page 3)

VPCF1 Series Hard Disk Drive
Replacement Instructions
P/N 989201341 Rev. B 3/3
NOTE! Proper mounting of
the Hard Drive bracket can be
verified with the Hard Drive
connectors appearing below the
plastic pull tab.
Step 13. Re-install the four (4) Hard
Drive Bracket screws to secure the
Hard Drive bracket to the New Hard
Drive.
(Hard Drive Reinstallation)
Steps 14-18
Step 14. Insert the (2) left tabs of the
new Hard Drive assembly into the slots.
Hold the Hard Drive on the sides to
avoid damage.
Step 15. Install the Hard Drive by
sliding the assembly to the right. Make
sure the screw holes are aligned
correctly.
Step 16. Re-install the two (2) Hard
Drive screws holding the Hard Drive
assembly in place.
Step 17.
Re-attach the Hard Drive Door by
sliding towards the unit.
Step 18. Re-install the two (2) Hard
Drive Door Screws to secure the Door.
Step 19. Re-install the battery pack and
reconnect the AC Adaptor.
Power on your computer and continue
with the recovery process by following
the instructions described on the back
of the recovery disk’s case.
Return the old Hard Drive to
Sony
using the included
shipping instructions.